|
08:00 – 13:00 Registration
Preliminary program of the Conference and the Seminar:
09:00 – 09:20 Opening ceremony
09:20 – 10:40 Session (Glass Producing Machines)
- Hessenkemper, H. Glass surface improvements during the forming process, (Technical University Freiberg, Germany)
- Pöting, K. Improvement of existing stem ware lines, (Athena Engineering and construction, Germany)
- Kováčik, I., Bujnoch, M., Brežný P., Vrábel, P. Influence of process
parameters on optical tableware glass distortion in double blow technology , (Rona, a. s., Slovakia)
10:40 – 11:00 Break
11:00 – 13:00 Session
- Janoušek, J. Automation SMC components in glass industry, (SMC Industrial Automation CZ, s. r. o.)
- Smrček, J. Measurements of glass moulds surface under pressings during the operation, (Electroheat, Praha)
- Novotný, F. Equipment for mixing and homogenizing of a glass melt, (VŠCHT Praha, Department of Glass and Ceramics, Praha)
- Jirman P., Matoušek, I. The analysis of the root cause (RCA+) and its using for context searching in glass production problems, (JIM design, v.o.s., Jablonec nad Nisou)
- Starý, M. Optimized plunger verification in pseudo-real working mode, (Technical University of Liberec, Department of Glass Producing Machines and Robotics, Liberec)
13:00 – 14:00 Lunch
14:00 – 15:20 Session
- Hotař, V. Flat glass detection and quality inspection due to its reflection, (Technical University of Liberec, Department of Glass Producing Machines and Robotics, Liberec)
- Horák, M. Combined gripping elements with increased loading capacity in the radial direction, (Technical University of Liberec, Department of Glass Producing Machines and Robotics, Liberec)
- Matoušek I. Predictive optimization of pressing cycle of glass melt, (Technical University of Liberec, Department of Glass Producing Machines and Robotics, Liberec)
15:20 – 15:40 Break
15:40 – 17:00 Session (Metals in Glass technologies)
- Podhorná, B. Mechanical Properties and High-temperature Structural Stability of Cast Ni-Cr-W-C Alloys used in glass technology, (UJP a. s., Praha)
- Hotař, A. High-temperature corrosive resistance of iron aluminide based on Fe3Al,(Technical University of Liberec, Department of Material Science, Liberec)
- Průša, V. Materials based on heavy metals (Mo, W), acceptable for using in glass industry, (Plansee, Austria)
17:00 – 17:20 Conference closing ceremony
18:00 - Conference Dinner
Poster session
- Plavec, M. Development of mobile platforms for service robots with vertical movement, (Technical University of Liberec, Department of Glass Producing Machines and Robotics, Liberec)
- Deryabin V.A., Farafontova E.P., Paramonova O.L. Capillary forces in glass batch preparation, (Ural Federal University named after the first President of Russia B. N. Yeltsin, Russia)
- Lazutkina O.R. Fusible enamel for enameling steel, (Ural Federal University named after the first President of Russia B. N. Yeltsin, Russia)
- Bujnoch, M., Kováčik, I., Brežný P., Vrábel, P. Analysis of cracking of thick-walled double-blowing products in pressing process, (Rona, a. s., Slovakia)
- Drobeček, J. Corrosion resistance of selected iron aluminide based on Fe3Al in molten of lead crystal, (Technical University of Liberec, Department of Material Science, Liberec)
Accompanying program
- Non-formal meeting of conference participants (evening September 19, 2012).
- Czech Glass Society´s board meeting.
The official language of the conference is Czech, Slovak and English.
Simultaneous interpreting for international participants will be arranged.
|
|
|