Program of Conference
TUESDAY 16th September 9:30 - 13:00
OPENING OF CONFERENCE
Presentation Awards of the Czech glass society
Presentation Plaques of Mechanical Engineering Faculty
Hessenkemper Heiko - TU-Bergakademie Freiberg, Germany
The workability of glass melts and new trends in the glass forming
Lochegnies Dominique - LAMIH/LGM Valenciennes, France
Testing, identification and virtual optimisers in glass processing
Matoušek Ivo - TU v Liberci, Czech Republic
Numerical simulation of glass pressing process and optimisation of glass
forming tools
Pöting Klaus - PÖTING GmbH and KG. Erkrath, Germany
SM-R Decorating Robot - working cell for the cold end
Werner Paszukiewicz - Biebuyck Ets s. a. Houdeng-Goegnies, Belgium
Evolution in hollow glass finishing
Bauer Bruno, W. Lindner Maschinen Grafenau, Germany
Innovative Control System for Glass Production Lines
TUESDAY 16th September 14:00 - 17:30
Joachim Korswird - Benteler Maschinenbau GmbH Bielefeld, Germany
Pre-press and heating flat glass for a laminated glass process
Boukal Petr, Jech Zdeněk, Voslář Jan - SKLÁRNY KAVALIER, a. s. Votice, Czech Republic
Glass burners and their application in hand and machine glass processing
Kubát Jan, Šefl Viktor - Crystalex, a. s. Nový Bor, Czech Republic
Experiences with CARBO technology - Flame gas C-53
Hladovec Jan, Prášek Pavel - LINDE TECHNOPLYN, a. s. Praha 9, CZ
Oxy-fuel burners for glass processing
Smrček Josef - VÚSU Praha, Czech Republic
Heat transfer during fire polishing process by oxy-gas burner
Cibulka Jan, Matoušek Ivo - TU v Liberci, Czech Republic
Problems of non-contact pyrometry in glass industry
Martinec Jaroslav, Dudák Miloš - DESKO, a. s. Desná, Czech Republic
Application of parametric modeller Catia V5 in glass moulds design
WEDNESDAY 17th September 9:00 - 13:00
Novotný František - TU of Liberec, Czech Republic
Development trends in glass-making and glass-finishing machinery
Drahoňovský Václav -SKLOSTROJ Sklářské strojírny Turnov, s. r. o. Turnov, Czech Republic
Servodrivers with electromotors in machinery at the hot-end of container production line
Cvejn Jan - TU v Liberci, Czech Republic
Software for optimal production of planar shapes of flat glass
Horák Marcel - TU v Liberci, Czech Republic
Specific problems of handling with glass sheets
Stránský Jiří - IKATES, s. r. o. Teplice, Čzech Republic
Testing of glass for building industries
Trhoň Vladimír - ROLLON, s. r. o. Beroun, Czech Republic
Linear motion system ROLLON
Jirman Pavel a kol. - podnikatel Jablonec nad Nisou, Czech Republic
Monitoring tendencies of development in glass moulds by means of TRIZ methodology
Havlíček František - Synerma, s. r. o. Skuhrov, Czech Republic
Modern software tools for mechanical design - LMS Virtual.Lab a ABAQUS
Hotař Vlastimil - TU v Liberci, Czech Republic
Description of structured data by means
of statistical analyses and fractal geometry
CLOSING OF THE CONFERENCE
OTHER ACTIVITIES
All registered participants are invited to a banquet at 7:00 pm on Tuesday
September 16. The banquet will take place at the IMPERIAL Hotel.
Board of the Czech Glass Society session.
LANGUAGE
Czech, Slovak and English were the official languages of
the conference. Simultaneous translation was provided.
EXHIBITION AND PRESENTATION OF COMPANIES
Burners for hand and machine glass production
Presentation of "Sklárny KAVALIER", a.s., Votice, CR
Transport belts, industrial screens, technical fabrics, perforated
material, laboratory screens and machines
Presentation of "Euro SITEX", s.r.o., Příbram, CR
Linear technique
Presentation of "ROLLON", s.r.o., Beroun, CR
The use of Ni-alloy electrodes (replacing Mo) for boosting of a drawing
chamber of the Fourcault machine
Poster by R.Kirsch, J.Arnošt, J.Štrojsa, Nový Bor, CR
High temperature construction and insulation materials
Presentation of "Promat", s.r.o., Praha 6, CR
Smart servodrives
Presentation of "Harmonic Drive" AG, Limburg/Lahn, Germany